Synchronising and setting up library...
This may take awhile and will continue in the background while open in your browser.
-
Device Records
-
Manufacturer Search Index
-
Device Search Index
-
Command Records
-
Command By Search Index
-
Command Search Index
-
Hex Data Search Index
-
Manufacturer Records
Reloading...
Read only
- Shared from
-
-
Shared configuration is up-to-date.
-
Shared configuration is outdated .
Contact Support
Provide the issue you are experiencing. We will review and respond shortly.
Transfer Configuration
Provide the transfer token to make this the primary configurator for this config.
Configuration Name
Device Hardware
Configuration last updated
To upgrade this button configuration to a TC3-CTL/2, click , update the device hardware, attach the new hardware and click the copy to device button.
Last updated in the configurator
Last copied from the device
Auto-copy is disabled.
Configuration has been loaded from memory. Click to reflect the attached device.
Note: Configuration may not reflect attached device.
Options
-
Syncing configuration...
- Configuration is remotely backed up
-
If you lose this configuration, you can copy the following recovery token or contact support with the recovery key.
- Backup Token:
- Backup Key:
- Enabling sharing of this configuration...
- Share:
-
- Disabling sharing of this configuration...
- Public configuration. No password.
- Protected configuration. Password:
Email Backup Token and Password
Enter your details and we will send an email with the token and password.
Contact Support
Provide the issue you are experiencing. We will review and respond shortly.
Email Shared Configuration
Enter the receipient, your details, and an optional note and we will send an email with the link and password. We include your details in the Cc field.
Buttons
- Reloading...
-
Disabled
No commands configured
Simultaneous
Repeat
Sequential
ms
-
RS232Executes with a intervalLoading...DelayData: No data provided ( , , , )IRLoading...DelayType: Hex Code transmission protocolData 1: Data: ... , μs, μs μsData 2: ... , μs, μs μsData 3: ... , μs, μs μsData 4: ... , μs, μs μsDC12v DelayTransmit No Action On Off On-to-Off Delay Off
-
No scheduling has been configured.
Reloading...
-
RS232Executes with a intervalLoading...DelayData: No data provided ( , , , )
- : Every Day Weekdays Weekends Mo Tu We Th Fr Sa Su
IRLoading...DelayType: Hex Code transmission protocolData 1: Data: ... , μs, μs μsData 2: ... , μs, μs μsData 3: ... , μs, μs μsData 4: ... , μs, μs μs- : Every Day Weekdays Weekends Mo Tu We Th Fr Sa Su
DC12v DelayTransmit No Action On Off On-to-Off Delay Off- : Every Day Weekdays Weekends Mo Tu We Th Fr Sa Su
WARNING: Data Loss
This action will overwrite the device configuration permanently.
You can save the current device configuration with the following:-
WARNING: Data Loss
Closing this configuration will delete it from your browser.
Read only Button Configuration
ms
« Select a button grouping
No other buttons have been assigned to this group. Update backlighting and grouping on other buttons to configure further.
When Button is pressed, set backlight for:
- Button to
Button has been disabled.
Configuration is invalid
Repeat transmit mode - commands will be sent repeatedly when the button is held down rather just once. This mode is suitable for volume control.
Sequential transmit mode - commands will be sent after each press of this button.
Simultaneous transmit mode - commands will be sent after the press of this button.
-
#TypeCommand Code
-
« Choose a type from the dropdown to add a new commandRS232Executes with a intervalLoading...DelayData: No data provided ( , , , )IRLoading...DelayType: Hex Code transmission protocolData 1: Data: ... , μs, μs μsData 2: ... , μs, μs μsData 3: ... , μs, μs μsData 4: ... , μs, μs μsDC12v DelayTransmit No Action On Off On-to-Off Delay OffData transmission over RS232LabelCharacters: /Note: Label is limited to 12 characters on the TC3-CTL hardware.Indicator LightLoading...Please provide feedback such as the correct commandNote: Does not match the referenced command in the libraryHexASCIIOriginal:You are editing a command loaded from the libraryHex Code
- Hex codes are a series of 2-character combinations using numerical (0-9) and alpha (A-F) characters.
- All characters are parsed and validated with each key press. Invalid characters are removed.
ASCII PreviewASCII DataASCII PreviewHex PreviewValidation Error:Data inputs have been validatedTransmission FormatTimingsecond secondsonce timessecond seconds between transmissionsAdded to libraryCommand LibraryManufacturerDevice / ModelCommand LabelData transmission over IRLabelCharacters: /Note: Label is limited to 12 characters on the TC3-CTL hardware.Indicator LightLoading...Please provide feedback such as the correct commandHex Codeμs low periodμs burstμs low periodNote: Does not match the referenced command in the libraryHex CodeOriginal:You are editing a command loaded from the libraryTransmission Configurationhzμs burstμs low periodμs burstμs low periodHex Codeμs low periodμs burstμs low periodValidation Error:Data inputs have been validatedHex Code 1μs low periodμs burstμs low periodHex Code 2μs low periodμs burstμs low periodHex Code 3μs low periodμs burstμs low periodHex Code 4μs low periodμs burstμs low periodValidation Error:Data inputs have been validated- Hex codes are a series of 2-character combinations using numerical (0-9) and alpha (A-F) characters.
- All characters are parsed and validated with each key press. Invalid characters are removed.
Timingsecond secondsCommand timing unavailable. Button mode set to .
Added to libraryCommand LibraryManufacturerDevice / ModelCommand LabelData transmission over DC12vLabelCharacters: /Note: Label is limited to 12 characters on the TC3-CTL hardware.Indicator LightDataTimingsecond secondsCommand timing unavailable. Button mode set to .
Changes are saved automatically.
Press ESC or click to exit.
Read only Scheduling
Configuration is invalid
Configure the device with various scheduled commands.
-
#TypeCommand CodeTiming
-
« Choose a type from the dropdown to add a new scheduled commandRS232Executes with a intervalLoading...DelayData: No data provided ( , , , )IRLoading...DelayType: Hex Code transmission protocolData 1: Data: ... , μs, μs μsData 2: ... , μs, μs μsData 3: ... , μs, μs μsData 4: ... , μs, μs μsDC12v DelayTransmit No Action On Off On-to-Off Delay OffData transmission over RS232LabelCharacters: /Note: Label is limited to 12 characters on the TC3-CTL hardware.Indicator LightLoading...Please provide feedback such as the correct commandNote: Does not match the referenced command in the libraryHexASCIIOriginal:You are editing a command loaded from the libraryHex Code
- Hex codes are a series of 2-character combinations using numerical (0-9) and alpha (A-F) characters.
- All characters are parsed and validated with each key press. Invalid characters are removed.
ASCII PreviewASCII DataASCII PreviewHex PreviewValidation Error:Data inputs have been validatedTransmission FormatTimingsecond secondsonce timessecond seconds between transmissionsAdded to libraryCommand LibraryManufacturerDevice / ModelCommand LabelData transmission over IRLabelCharacters: /Note: Label is limited to 12 characters on the TC3-CTL hardware.Indicator LightLoading...Please provide feedback such as the correct commandHex Codeμs low periodμs burstμs low periodNote: Does not match the referenced command in the libraryHex CodeOriginal:You are editing a command loaded from the libraryTransmission Configurationhzμs burstμs low periodμs burstμs low periodHex Codeμs low periodμs burstμs low periodValidation Error:Data inputs have been validatedHex Code 1μs low periodμs burstμs low periodHex Code 2μs low periodμs burstμs low periodHex Code 3μs low periodμs burstμs low periodHex Code 4μs low periodμs burstμs low periodValidation Error:Data inputs have been validated- Hex codes are a series of 2-character combinations using numerical (0-9) and alpha (A-F) characters.
- All characters are parsed and validated with each key press. Invalid characters are removed.
Timingsecond secondsCommand timing unavailable. Button mode set to .
Added to libraryCommand LibraryManufacturerDevice / ModelCommand LabelData transmission over DC12vLabelCharacters: /Note: Label is limited to 12 characters on the TC3-CTL hardware.Indicator LightDataTimingsecond secondsCommand timing unavailable. Button mode set to .
Changes are saved automatically.
Press ESC or click to exit.
- : Every Day Weekdays Weekends Mo Tu We Th Fr Sa Su
24HHMMDays of weekChanges are saved automatically.
Press ESC or click to exit.
Device Config in JSON (Read-only)
CTL3 Device Console
Device Config rendered for upload (Read-only)
Generated Configuration
Device Configuration
Local Config
Buttons
Schedules
Time
Version
Device Config
Buttons
Schedules
Time
Version
Changelog
-
- Current Version
No changes have been tracked.
Synchronising and setting up library...
This may take awhile and will continue in the background while open in your browser.
-
Device Records
-
Manufacturer Search Index
-
Device Search Index
-
Command Records
-
Command By Search Index
-
Command Search Index
-
Hex Data Search Index
-
Manufacturer Records
Press ESC or click to exit.
Import Configuration
Drop the file here to upload...
Choose Configuration File
(Allowed: .json)
or
Paste the configuration
The import file you provided has been verified.
Select from the following options:
Configuration Preview
Press ESC or click to exit.
Import Shared Configuration
Share URL
The configuration that you are importing requires a password.
Password
The import file has been downloaded and verified.
Select from the following options:
Configuration Preview